Kyocera BF-710 Guía De Uso página 22

English
Troubleshooting
Paper
If ejected copies are not flat or are stacked
unevenly, turn over the paper in the cassette and
reload it. If copies are curled, refer to Curled
Output on page 31.
If a paper jam occurs, check the side guide
located in the cassette is adjusted to the size of
paper loaded.
Clearing Paper Jams
When a paper jam occurs, copying stops and the machine operation panel will display a
message indicating a paper jam has occurred.
NOTE:
paper jams. The machine operation panel will return to the display previous to the paper
jam when the paper jam has been cleared.
Coupling Section
If the illustration shown displays on the machine's
operation panel, there is a paper jam in the
coupling section between the Document Finisher
and the machine.
1
While pushing the finisher release lever, pull the
finisher out from the machine.
20
All manuals and user guides at all-guides.com
Leave the main power switched ON ( | ) while performing the procedure to clear
DF-710, MT-710, BF-710, PH-5A, PH-5B AND PH-5C OPERATION GUIDE