Publicidad
Idiomas disponibles
Idiomas disponibles
3. REAR VIEW
1) Power supply input 100-240 VAC 50/60 Hz.
It allows the connection of the device to the mains by
means of the supplied cable (CEE7 Male / C13 Female,
1.8m).
2) Mains power fuse (1A). There is a spare fuse inside the
same box.
3) ETH A connector.
It is used to connect the equipment to the IP network via
an RJ45 FTP Cat 5 cable (not included).
The connector has a yellow LED (LINK) indicating
connection to the network, and a green LED (ACTIVITY)
that flashes indicating sending or receiving data.
4) ETH B connector.
It is used, in a redundant network, as a secondary
connection to the IP network.
CC-200ETH8 Version 6.0.001
CC-200ETH8
Figure 2
TCP/IP connections controller
5) Grounding.
6) POWER LED.
Green LED. It lights up when the equipment is operating
on both 100/240 VAC mains supply and 24 VDC input.
7) CONSOLE connector.
Mini USB connector. Allows to monitor the system.
Specialized personnel only.
8) Power supply input 24 VDC.
24 VDC power input. Connect a 24 VDC power supply (not
included) to this input.
R+D Department
for Optimax2 system
5
Publicidad
