Blackstone Adventure Ready 2273 Manual Del Propietário página 9

Model: 2273
IGNITIoN INSTRUCTIoNS
1. CHECK VALVES
Turn knob to oFF position�
STEP 01
Push in knob and release� Knob should spring back�
STEP 02
If knobs do NoT If knobs do NoT spring back, replace valve assembly before using appliance. spring back, replace valve assembly before using appliance.
Rotate knob to loW then turn back to oFF� Knob should
STEP 03
turn smoothly�
3. CHECK BURNER FLAME
Always check burner flame before use�
light burners and rotate knobs from HIGH to loW�
STEP 01
look below the cooking top to view burners� When knob is at
STEP 02
HIGH, flames should be larger than when knob is at loW�
3. CHECK BURNER FLAME
Always check burner flame before use�
light burner and rotate knob from loW to HIGH�
STEP 01
look below the turntable to view burner� When knob is at
STEP 02
HIGH, flames should be larger than when knob is at loW�
BLACKSTONEPRODUCTS.COM/SUPPORT
USING YOUR BLACKSTONE
2. PIEZO-ELECTRIC GRIDDLE IGNITION
do NoT lean over the appliance while lighting�
❶ Push the control knob in to ❶
start gas flowing�
❷ ❷ Turn the control knob
counter-clockwise to activate
the starter�
❸ ❸ Adjust the temperature to
desired level�
HEALTHY BURNER FLAME
PATTERN
❶ ❶
❷ ❷
❸ ❸
❶ ❶ Flickers of yellow color�
❷ ❷ dark blue color�
❸ ❸ Vibrant blue�
HEALTHY BURNER FLAME
PATTERN
❶ ❶
❷ ❷
❸ ❸
❶ ❶ Flickers of yellow color�
❷ ❷ dark blue color�
❸ ❸ Vibrant blue�
| OWNER'S MANUAL
❶ ❶
❷ ❷
❸ ❸
BURNER FLAMES ARE YELLOW
OR IRREGULAR
If there is a sudden drop or low
flame issue, please reference the
Troubleshooting chapter�
BURNER FLAMES ARE YELLOW
OR IRREGULAR
If there is a sudden drop or low
flame issue, please reference the
Troubleshooting chapter�
09