Descargar Imprimir esta página

ENAR GEEL 10 Manual De Operación página 59

Publicidad

Idiomas disponibles

Idiomas disponibles

5.6 OPERATING HEAVY LOADS
Remember
5.7 USE OF EXTENSION CORDS
Backgroung
Remember
PORTABLE GENERATOR
Limit operations requiring the maximum rated output of 5500 Watts to 20–30 minutes.
For continuous operation, do not exceed the continuous rated output of 5000 Watts.
NOTICE: DO NOT exceed the current limit specified on the control panel for any
receptacle.
When a long extension cord is used to connect an appliance or tool to the generator, a
voltage loss occurs—the longer the cord, the greater the voltage loss. This results in less
voltage being supplied to the appliance or tool and increases the amount of current draw
or reduces performance. A heavier cord with a larger wire size will reduce the voltage
loss.
WARNING
Damaged extension cords can cause electrical shock, resulting in serious injury or death.
DO NOT use worn, bare, or frayed cords. Replace damaged cords immediately.
Use the chart below as a guide for selecting proper cable size.
Loads in Watts
Current
(Amps)
120V
240V
2.5
300
5
600
1200
7.5
900
1800
10
1200
2400
15
1800
3600
20
2400
4800
Use only extension cords rated for outdoor use and equipped with a third-wire ground.
NOTICE: Operating equipment at low voltage can cause it to overheat.
Maximum Cable Length in Feet
#10
#12
600
1000
600
500
300
350
200
250
150
150
100
125
75
GEEL 3, GEEL 5, GEEL 7
#14
#16
375
250
200
125
125
100
100
-
65
-
50
-
GEEL
en
21

Publicidad

loading

Productos relacionados para ENAR GEEL 10

Este manual también es adecuado para:

Geel serieGeel 3Geel 5Geel 7