FTE univers U7000 Manual De Usuario página 58

QUICK INSTALLATION GUIDE
IMAGE 2
IMAGE 3
Second Audio
: If the channel has no audio language that
corresponds with "First Audio" but with "Second Audio" the
system will play the second audio language as default. If no
audio language corresponds with the "Second Audio" then the
default language of the current channel will be played instead.
The selections of audio languages include: English, German,
French, Spanish, Italian, Portuguese, Turkish, Polish, Russian,
Danish, Greek, Hungarian, Dutch, Arabic, Farsi and Slovak.
LNB Power
: Here you can set the power output to the LNB. If
your receiver is connected to the LNB directly then you need to
set the LNB Power to "On". If your receiver is connected to a
multi switch (SMATV signal distribution system) then it may be
that you don't need to provide the power to the LNB. But since
this is depending on the kind of installed distribution system we
recommend you to contact your installer or to refer to the user
manual of this system to get the correct information.
Single search
: You can edit the following items (Image 2):
1. Satellite: Press [
enter satellite list to select directly.
2. LNB Configuration: Selecting this option and pressing [OK],
the LNB Configuration menu will be displayed. In this menu,
next options can be modified (Image 3):
- LNB Type: Press [
and "Universal" mode. If you select "Standard" or "User", the
frequency of the LNB can be changed. Pressing [OK] the
frequencies will appear to be edited. Select the frequency
you want to edit and change the value with [
- 22K: Use [ ] to switch "ON" and "Off". The 22 kHz sig-
nal is used in KU Universal LNBs to change between low
band and high band. After choosing LNB type "Universal"
you cannot modify 22K.
- DiSEqC1.0: Use [
switches.
- DiSEqC1.1: Use [
switches.
- Positioner: Press [
DiSEqC1.2 / GoToX". *
* This receiver does not allow moving Diseq motors
- Polarity: Press [
Once the LNB is configured, press [Exit] to save the chan-
ges and go to the previous window to continue configuring
the antenna.
- Toneburst: Press [
"Off".
3. DiSEqC1.0: Use [
switches.
4. On "TP Index" item use [
PAG. 5
] to switch Satellites or press [OK] to
] to switch among "Standard", "User"
] to switch the options of DiSEqC
] to switch the options of DiSEqC1.1
] to select between "None /
] to switch between "Auto / H / V".
] to switch this function "On" or
] to switch the options of DiSEqC
] to select the desired
]