DCU Tecnologic 70100030 Manual De Instalación página 6

ENG
NOTE: Read the entire instruction manual before you start installation and assembly
WARNING:
This TV mount was designed to be installed and utilised INLY as specified in this manual.
Improper installation of this product may cause damage or serious injury.
This product should only be installed by someone with good mechanical ability who fully
understands this manual.
Make sure that the supporting surface will safely support the combined weight of the
equipment and components.
Always use an assistant or mechanical lifting equipment to safely lift and position the
equipment.
Tighten screws firmly, but do not over tighten. Over tightening can cause damage to the
items, this greatly reduces their holding power.This product is intended for indoor use only.
1. Solid Brick and Concrete Mounting
WARNING
2. Installing Adapter Brackets
Mark the exact
location of
mounting holes
Installers must verify that the supporting surface will safely support the combined weight
of the equipment and components.
Top of
the TV
FIXED WALL MOUNT
Drill pilot holes Screw the wall
plate onto the wall
Note: Choose appropriate screws,
washers and spacers (if necessary)
according to the type of screen.
Position the adapter brackets as close as
possible to the centre of the TV
Screw the adapter brackets onto the TV
Tighten all screws but do not over tighten