Worx Nitro WX813 Manual Original página 11

Wear dust mask
Not permitted for face grinding with
abrasive cutting off wheels
Wear protective gloves.
Batteries may enter water cycle if
disposed improperly, which can be
hazardous for ecosystem. Do not dispose
of waste batteries as unsorted municipal
waste.
Do not burn
Make sure the battery is removed prior
to changing accessories
Li-Ion battery This product has been
marked with a symbol relating to
'separate collection' for all battery
packs and battery pack. It will then
Li-I on
be recycled or dismantled in order to
reduce the impact on the environment.
Battery packs can be hazardous for
the environment and for human
health since they contain hazardous
substances.
Waste electrical products must not be
disposed of with household waste.
Please recycle where facilities exist.
Check with your local authorities or
retailer for recycling advice
COMPONENT LIST
1. AUXILIARY HANDLE
2. SPINDLE LOCK BUTTON
3. ON/OFF SWITCH
4. BATTERY PACK RELEASE BUTTON *
5. BATTERY PACK *
6. FILTER
7. WHEEL GUARD FOR GRINDING
8. GRINDING DISC
20V Cordless Brushless Angle Grinder
9. SPANNER
10. INNER FLANGE
11. OUTER FLANGE
12. SPINDLE
13. GUARD CLAMPING LEVER
14. WHEEL GUARD FOR CUTTING *
15. ABRASIVE CUTTING DISC *
*Not all the accessories illustrated or
described are included in standard delivery.
TECHNICAL DATA
Type WX813 WX813.X (813-designation of
machinery, representative of sander and
grinder)
Charger voltage
Rated voltage
No load speed
Disc bore
Disc size
Spindle thread
Wheel
Machine weight (Bare
tool)
**X=1-999, A-Z, M1-M9 there are only used for
different customers, there are no safe relevant
changes between these models
***Voltage measured without workload. Initial
battery voltage reaches maximum of 20 volts.
Nominal voltage is 18 volts.
NOISE INFORMATION
A weighted sound pressure
A weighted sound power
K &K
pA wA
Wear ear protection.
WX813 WX813.X **
100-240 V~ 50/60 Hz
20 V Max***
8500 r/min
22.2 mm
115 mm
M14
Grinding (Type 27)
1.6 kg
L : 84.4 dB(A)
pA
L : 95.4 dB(A)
wA
3 dB(A)
EN
11