Publicidad
Idiomas disponibles
Idiomas disponibles
Protection class
Degree of protection
4.2
Noise information, measured in accordance with EN 60335-2-69
Emission sound pressure level (L
Sound power level (L
WA
Uncertainty
4.3
Vibration information, measured in accordance with EN 60335-2-69
Vibration emission value
Uncertainty (K)
5
Preparations at the workplace
5.1
Changing the dust bag
1. Set the control switch to the OFF position.
2. Open the 2 catches.
3. Lift the suction head off the waste material container.
4. Remove the dust bag.
▶ Dispose of the dust bag in accordance with the applicable regulations.
5. Secure the holder with the dust bag to the ribs of the waste material container.
6. Fit the suction head on to the waste material container and close the 2 catches.
5.2
Connecting/disconnecting the suction hose
1. To connect, push the suction hose into the intake fitting.
2. To disconnect, twist the suction hose back and forth and pull it out of the intake fitting.
5.3
Setting the hose diameter
1. For vacuuming up dry, non-flammable dust which has an exposure limit value, or when vacuuming up
wood shavings, adjust the hose diameter setting switch to the correct diameter setting for the suction
hose used.
2. Change the setting for the hose diameter, and consequently the threshold for the acoustic warning, by
repeatedly pressing the
6
Operation
WARNING
Risk of injury. Damage to the filter system may allow harmful dust (health hazard) to escape.
▶ In an emergency (e.g. filter ruptured), switch the vacuum cleaner off, disconnect the vacuum cleaner
from all power sources (remove battery or unplug supply cord) and have the vacuum cleaner checked by
a trained and qualified person before further use.
6.1
Switching the vacuum cleaner on or off
You can prolong battery runtime by activating operation with reduced suction power.
→ To activate or deactivate, press the ECO button.
You can operate the vacuum cleaner by means of a Bluetooth module and corresponding remote
control unit (optional accessory).
→ Set the control switch to the BLUETOOTH position.
Read and observe the instructions on safety and use in the operating instructions of the accessory.
1. To switch on, turn the control switch to the ON position.
24
English
)
pA
)
3
button.
I
IP X4
82.9 dB(A)
92.7 dB(A)
2 dB(A)
< 2.5 m/s²
Is taken into account in the stated value
2416651
*2416651*
Publicidad
