Publicidad
3. Turn the pot a bit to ensure full contact with the surface of the bottom heating element.
4. Place the recipe ingredients inside the pot.
5. Close the lid.
6. Connect the multicooker to the power source. Please always follow above instructions before beginning use.
OPERATION
Press the button
to start. Turn the knob
Multicooker
followed by the rest of the autoprograms. When a program is chosen, the display shows its cooking settings.
Press and hold the button
NOTICE: countdown of cooking time in FRY/DEEP FRY
Until the temperature reaches these values; display shows
NOTICE: There is no cooking time countdown during the runtime of EXPRESS
or when interrupted by the User.
After the end of the program the cooker enters into a Keep warm mode (if Keep warm function is active). When Keep warm is active, the LED-backlight of the
WARM is active. Press and hold
USER SETTINGS
The four User settings are empty cells with minimal values of cooking settings (cooking time – 00:00; cooking temperature - 30°C). The user can set and save any target
values for preparing customized dishes.
to choose the programs you need. First, there are four User settings, then the programs SMART and
for 2 seconds to start a program which starts after a beep and the countdown of cooking time starts.
and PASTA
.
to turn the Keep warm OFF.
starts when the temperature reaches certain value (160°C for FRY and 100°C for PASTA).
; display shows
until the end of the program. This program stops automatically
36
MT-4317
KEEP
Publicidad
