Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE AND CLEANING
To ensure a long, trouble-free useful life for your
unit, proceed as follows:
• To clean the motor and base used a cloth.
Never
use
alcohol,
inflammable liquids.
• Never immerse the unit in any liquid.
• If you notice unusual noises or vibrations, send
the unit to your technical assistance service.
• This unit is designed to work correctly on the
four rubber legs (D).
PRECAUTIONS
♦ Before connecting the unit to the mains, check
that the power supply is 230 V, 50/60 Hz.
♦ Discard any cracked or damaged brush or
grinding wheel: if these elements break during
operation they could cause serious accidents.
♦ Before starting work, ensure that the brush-
holder/wheel holder is firmly attached to the
motor shaft.
♦ When handling workpieces, use safety goggles,
gauntlets, a face mask and a suitable safety
screen. We recommend MESTRA R-080200 or
R-080210 screens.
♦ Do not allow children or unskilled personnel to
handle the unit.
♦ If the motor shaft locks during normal operation,
disconnect the unit from the mains before
attempting to release it by turning it manually.
solvents
or
other
♦ Never polish, brush or grind materials which
may give off particles which are toxic if inhaled.
♦ Before starting to polish or grind a workpiece,
check the motor spin direction: the attack angle
depends on this direction.
♦ Never use the unit close to solvents, alcohol or
other inflammable materials. Take all possible
precautions when grinding materials which may
give off sparks.
♦ Never use the unit without proper exhausters.
♦ Keep the working area clean and tidy in order to
prevent accidents.
♦ Wear proper working cloth. Loose cloth, hanging
or long hair could be caught by the machina.
♦ Make sure that you switch the power Off befor
plugging the unit, in order to avoy sudden start
of the motor.
♦ Disconnect the unit from power supply before
changing the wheel.
TECHNICAL CHARACTECTERISTICS
Power supply:
Power:
Speed:
Height:
Height of shaft centre line:
Width with brush holders:
Weight:
English
230 V, 50/60 Hz
200 W
2000-7000 rpm
135 mm
95 mm
270 mm
3 kg
Publicidad
