Wolf RWT 1000 Instrucciones De Montaje página 18

Fitting segments No. 7-12
N.º 6
N.º 1
N.º 2
N.º 5
N.º 3 N.º 4
No. 3
Preparation for fit-
ting segment No. 7
No. 6
No. 6
18
Installation instructions
N.º 7
No. 6
No. 5
No. 4
The next rotor segments are fitted one after the other in the same way, in
Please
line with the numerical labelling 7, 8, 9, 10, 11, 12.
note
12 10 11
10a
The rotor must be prevented from turning unintentio-
nally.
- It must be possible to turn the assembled rotor segments
onward in a controlled manner
- The safeguard must be sized in accordance with the
weight of the rotor
- Use straps or other suitable means as a safeguard to
prevent turning while fitting the rotor segments.
- Secure the rotor so that the top of segment 6 is horizon-
tally level when segment 7 is fitted onto it.
7
6
8
- Remove threaded bar M12 (item 9) and nuts 3d
M12 "long" with washers (item 8) from segment
8
No. 6
9
8
- Remove 2 bolts M8x25 (item 10)
- Remove 2 fitting bolts M8x30 (item 11) with nuts M8 and
washers (item 12)
The centre bolt 1x M8x25 (item 10a) should NOT
-
Please
BE REMOVED.
note
DO NOT REMOVE
No. 4
No. 3
3065280_201804