Publicidad
Idiomas disponibles
Idiomas disponibles
LIMBING
• Limb a tree only after it is cut down.
• Leave the larger limbs underneath the
felled tree to support the tree as you
work.
• Start at the base of the felled tree and
work toward the top, cutting branches
and limbs. Remove small limbs with
one cut.
° Keep the tree between you and the
chain.
• Remove larger, supporting
branches
with the 1/3, 2/3 cutting techniques de-
scribed in the bucking section.
• Always use an overcut to cut small
and freely hanging limbs. Undercut-
ting could cause limbs to fall and
pinch the saw.
PRUNING
WARNING;
Limit pruning to limbs
shoulder height or below. Do not cut if
CUSTOMER
RESPONSIBILITIES
branches are higher than your shoul-
der. Get a professional to do the job.
• Make your first cut 1/3 of the way
through the bottom of the limb.
• Next make a second cut all the way
through the limb.
• Finish the pruning operation by using
an ovemut so that the stump of the
limb protrudes t to 2 inches from the
trunk of the tree.
i
| Secondcut
/
\
3rd cut I to 2in.
t
fromtrunkof tree
FlU in dates as you complete
Before After
regular service
Use
Use
Check for damaged/worn parts
Check for loose fasteners/parts
._,
Check chain tension
Check chain sharpness
Check guide bar
Clean unit & labels
Clean air filter
Clearv'inspect spark arrestor
screen & inspect muffler
Replace spark plug
•
r
v"
EveryJ Every
5 hrs.125 hrs. Yearly
Service
Dates
GENERAL RECOMMENDATIONS
The warrantyon this unitdoes notcov-
er itemsthat have been subjectedto
operatorabuseor negligence.To re-
ceive fullvalue from the warranty, the
operator mustmaintain unit as instruct-
ed in this manual. Various adjustments
will need to be made periodically to
properly maintain your unit.
• Once a year, replace the spark plug,
air filter element, and check guide bar
and chain for wear. A new spark plug
and air filter element assures proper
air-fuel mixture and helps your engine
run better and last longer.
WARNING: Disconnect the spark plug
before performingmaintenanceexcept
for carburetoradjustments.
LUBRICATION
1 Bar
S-rocket
2 Bar Oil
"_
I
F,,cap t
I Us_
2 Use Craftsman chainsaw bar oil
11
Publicidad
