10 Storing
► Fold the push handle (4) down completely.
The push handle (4) engages with an audible
click.
10 Storing
10.1
Storing the push sweeper
1
► Fold the push handle (1) down completely.
► Set up the push sweeper vertically and secure
it against falling over.
► Secure the push handle against unintentional
folding down.
► The push sweeper should be stored in such a
way that the following conditions are met:
– The push sweeper cannot tip over or move.
– The push sweeper is out of the reach of
children.
– The push sweeper is clean and dry.
11 Cleaning
11.1
Cleaning the push sweeper.
► Clean plastic parts with a damp cloth.
► Clean the ventilation slots with a brush.
11.2
Cleaning the circular brushes
and sweeper drum assembly.
► If the circular brushes or the sweeper drum
assembly is blocked: Carefully remove wound
or wedged foreign matter.
► Clean the circular brushes and sweeper drum
assembly with a wet rag.
11.3
Cleaning the air filter
► Remove the container.
0458-767-9901-A
1
2
► Pull air filter (1) out of the guides.
► Remove the foam inserts (2).
► Rinse the foam inserts (2) under warm running
water.
► If the air filter (1) is damaged: Install a new air
filter (1).
► Allow the foam inserts (2) to dry in the air.
► Insert the foam inserts (2) into the air filter (1).
► Insert the air filter (1) into the guides in the
push sweeper.
12 Maintenance
12.1
Straightening bent bristles
► Carefully heat bristles with a hairdryer and
straighten them.
NOTICE
■ Too high temperatures, hot air or open flames
will permanently damage the bristles.
► Use a hot air blower to straighten the bris‐
tles.
12.2
Lubricating the gearbox
2
► Place push sweeper upright.
English
1
2
1
17