filtreau BSONE-EVO-10 Manual De Usuario página 73

3.3.2.2- Programming the spotlights of the pool through the auxiliary
relay
The following figure gives an example of use of the auxiliary relay incorporated
in the BSONE-EVO series equipment. Lighting of your swimming pool can be
programmed to switch on and off, following this diagram:
Attention: Never exceed 12A when using the auxiliary relay. For higher
currents, supplement the circuit with a contactor.
Remember that the relay is potential free, and therefore the circuit should be
supplied externally.
73 / 95
Manual BSONE-EVO v.2