filtreau BSONE-EVO-10 Manual De Usuario página 89

"EXCESS SALT"
"CLEANING"
"TEMPERATURE".
4.2.1.1- Additional warning messages
ORP or PPM value is
flashing
pH value is flashing
Value ---o (Water
temperature) is flashing
Filter time
Manual BSONE-EVO v.2
The electrolysis cell is worn.
Excess salt in the water.
Incrustations or objects in
the electrolysis cell causing
excess current.
The chlorinator is in the
self-cleaning process. The
process lasts 5 minutes
The ambient temperature is
>40º
The radiator fins
obstructed or are not in a
vertical position.
The redox
chlorine probe
balanced in automatic
mode. When the probe
is balanced, the value
remains set.
The pH probe
balancing. When
probe is balanced, the
value remains set.
The value of the water
temperature
15º.
The equipment
switched off before the
time set in
automatic
Replace the electrolysis cell with
a new one.
No action required if excess is
not very significant.
Clean the cell.
None.
Try and place the equipment in
another position where it is not
over 40º or perform forced
ventilation.
equipment to rest for a few
minutes.
Consult section number
4. Installation
are Place the equipment so that air
is circulated for correct cooling.
or free None.
are
is None.
the
Consider the use of a
is under winter
product.
has Restart the filtering cycle
semi-
Leave the
hibernator
89 / 95