Owner's Manual |
Ignition | Battery Powered
!
WA R N I N G
Do not lean over the appli-
ance while lighting.
!
WA R N I N G
If ignition does NOT occur
in 5 seconds, turn burner
controls OFF, wait 5
minutes and repeat lighting
procedure.
If burner does not ignite with
open valve, gas will continue
to flow out of burner and
could accidentally/inad-
vertently ignite with risk of
injury.
16
blackstoneproducts.com/support
IGNITION |
BAT TERY POWERED
PROPANE BURNER OPERATION
For proper ignition and operation of the appliance follow the steps below.
S T E P 0 1
In order for the ignitor
button to work properly, ensure that
the battery is installed correctly.
S T E P 0 2
❶ Ensure that the control knob is
turned to OFF.
S T E P 0 3
Ensure that the LPG
tank is properly connected to
the unit. Turn gas ON at the LPG
cylinder by slowly turning the OPD
handwheel halfway.
S T E P 0 4
❷ Push and hold the ignitor button.
❸ Push and turn the control knob counter-clockwise to HIGH.
(Release the ignitor button when the burner lights.)
❹ Adjust the temperature to desired level.
❷
one half turn
❶
❸
❹
Model 2006