Ryobi RY18LMX33A Manual Del Usuario página 6

■ After each use, clean the plastic parts with a soft, dry
cloth. Any part that is damaged should be properly
repaired or replaced by an authorised service centre.
■ Replace damaged blades and bolts in sets to preserve
balance.
■ Be careful during adjustment of the product to prevent
entrapment of the fingers between moving blades and
fixed parts of the product.
■ The blade on the product is sharp. Use extreme caution,
and wear heavy-duty gloves when fitting, replacing,
cleaning, or checking bolt security.
■ The blade bolts must be adequately tightened. See the
manufacturer's recommendations for blade bolt torque,
which can be found in the product specification table in
this manual.
■ Be aware that even though the power source is turned
off, the blades can still be moved.
CLEARING BLOCKAGES
■ Turn off the product, and remove the isolator key and the
battery pack. Make sure that all moving parts have come
to a complete stop.
■ Always wear heavy-duty gloves when checking or
clearing a blockage. The blades are sharp, and the
blockage itself could be a sharp object.
■ Remove the grass catcher. Check and carefully clear the
grass catcher for obstructions.
■ Check the grass discharge chute, and carefully clear
blockages.
■ Turn the product on its side. Check its underside and the
area around the blade. Carefully remove any blockages.
Remember that the blade may move during cleaning.
KNOW YOUR PRODUCT
See page 121.
1. Start button
2. On/off lever
3. Motor control cable
4. Top handle
5. Motor control cable retainer
6. Operator's manual
7. Handle knobs
8. Bottom handle
9. Grass catcher
10. Cutting height adjustment lever
11. Grass discharge chute cover
12. Spring pins
13. Carry handle
14. Rear wheel
15. Battery door
16. Front wheel
17. Isolator key
18. Battery pack
19. Charger
SYMBOLS
Safety alert
Read and understand all instructions
before operating the product. Follow all
warnings and safety instructions.
6
Wear ear and eye protection.
Do not expose the product to rain or
damp conditions.
Remove the battery pack before
maintenance.
Beware of thrown or fl ying objects.
Keep all bystanders, especially
children and pets, at least 15m away
from the operating area.
Beware of sharp blades. Blades
continue to rotate after the motor is
switched off .
Do not operate the product on inclines
greater than 15°. Mow across the face
of slopes, never up and down.
94
Guaranteed sound power level
Do not dispose of waste batteries,
waste electrical and electronic
equipment as unsorted municipal
waste. Waste batteries and waste
electrical and electronic equipment
must be collected separately. Waste
batteries, waste accumulators, and
light sources have to be removed
from the equipment. Check with your
local authority or retailer for recycling
advice and collection point. According
to local regulations, retailers may
have an obligation to take back waste
batteries and waste electrical and
electronic equipment free of charge.
Your contribution to the reuse and
recycling of waste batteries and waste
electrical and electronic equipment
helps to reduce the demand of raw
materials. Waste batteries, in particular
containing lithium, and waste electrical
and electronic equipment contain
valuable and recyclable materials,
which can adversely impact the
environment and the human health if
not disposed of in an environmentally
compatible manner. Delete personal
data from waste equipment, if any.