Publicidad
Idiomas disponibles
Idiomas disponibles
Make sure that the power switch is in the off position and that the vacuum/blower is unplugged. Remove and
empty the collection bag. Check that the function selector lever operates normally and is not obstructed by
debris. Brush the area around the turbine and inside the vacuum/blower tube to clear debris.
Ensure that the ventilation slots in the engine block are kept clean at all times.
Never clean the machine with water, either in liquid or aerosol form. The engine block should be cleaned with
a cloth soaked in water, nothing else. Never use solvents or detergents! Doing so may cause irreversible
damage to the plastic parts of the machine. Finally, dry the motor block thoroughly.
Store the machine in a dry place out of reach of children.
If the cable needs to be changed, the change must be made by the manufacturer or his agent, for safety reasons.
CAUTION: FOR YOUR SAFETY, THIS BLOWER/VACUUM HAS DOUBLE INSULATION. TO
AVOID RISK OF FIRE, INJURY OR ELECTRIC SHOCK, USE ONLY PARTS IDENTICAL TO
THOSE LISTED IN THE PARTS LIST. REASSEMBLE THE UNIT EXACTLY AS IT WAS
ORIGINALLY ASSEMBLED TO AVOID THE RISK OF ELECTRIC SHOCK.
Publicidad
