Publicidad
Idiomas disponibles
Idiomas disponibles
8.
Installthe grass binsontothe bin supportassemblyby inserting
the front edge in first (1),as seenin Fig. 16,and settingthe back
edge down(2) until it fits intothe assembly.
Hinge Pin
!
7.
f
\
Figure13
Figure14
Opengrass catchercover by pushingin on the rear,right-sidetab
with yourright-hand,as seenin 1 of Fig. 15,and lifting with your
left-handin the rear center,2.
,%
Figure15
Attaching Blades
Figure16
Alwaysprotectyourhandswhileservicingbladesby wearingheavy
work glovesor usingheavyrags.
..J
NOTE:Threehigh-liftbaggingbladesare includedinthe grass-catcher
kit. Replacethe bladeswith these newbladesand savethe existing
bladesas replacements or to reinstallon the bladespindleswhennot
usingthe baggerkit.
1.
Removecuttingdeck from beneaththetractorfollowinginstruc-
tions for Deck Removal i n operator'smanualof thetractor.Gently
flip the deck overto exposeitsunderside.
2.
Placea block of woodbetweenthe centerdeck housingbaffle
and the cuttingblade to act as a stabilizer.See Fig. 17.
3.
Usea 15/16"wrenchto removethe hexflangenut that secures
the bladesto the bladespindleassemblies.See Fig. 17.
Wood Block
Hex FlangeNut
Spindle Assembly
Figure17
11
Publicidad
