Amate Audio Joker Active Systems Manual De Usuario página 17

Joker Active systems
D) PROTECTION LED: This led lights up when the amplifier is in a protection
situation (such as temperature excess, overcurrent, or other situations that can
compromise the amplifier's integrity).
It will also light up when the amplifier is in standby mode. This happens for a couple of
seconds at startup.
The Protection led will light off when the amplifier recovers from the abnormal
situation. Shall the Protection led keep up lighted on even after a system restart,
please contact an authorized service.
E) LIMITER LEDS: The limiter leds light up to indicate that the amplifier is delivering
the maximum power set by the limiter circuit. The limiter prevents the loudspeaker
from receiving excessive or distorted signal. Continuous lightning of these leds
indicate that the signal is being massively compressed. In this case, the input level
should be reduced in order to get a proper dynamic headroom.
Model Specifications:
F) MODEL DATA: The basic data of the model is found here:
- Model reference
- Amplifier rated power (Watts)
- Maximum Sound Pressure Level delivered by the system (dB SPL)
G) QR CODE: For further information about the specifications of the system, a QR
Code is available on this panel.
To scan the QR code you need a mobile device with camera, a QR Code reader
application(*) and an internet connection. When the QR is scanned, the web surfer of
your mobile device will be redirected to the product page of Amate Audio's web site,
when you can find all the information related to the product.
(*)QR Code reader applications are available for free for the most common
smartphone platforms: iPhone/iPad (App Store), Android Marketplace, Blackberry
AppWorld and Bada App Market.
Connection Plate
H) AC MAINS INPUT: Mains supply connection via PowerCon. Blue connector for AC
in.
Always use mains power cable supplied by manufacturer.
Never connect the Joker cabinets to an unearthed mains supply or by
using an unearthed mains cable.
I) BALANCED INPUT/LINK:
XLR-3 Female balanced signal connector for signal input.
XLR-3 Male connector for parallel connection of various cabinets with the same input
signal.
IMPORTANT: Please always use balanced microphone cable with the following pin
assignment: 1= Shield (Ground) 2= Live (+)
17
3= Return (-)
Oct 2015
Amate Audio