EN
54
•
There is a risk of injury if moving blades are accidentally exposed.
•
Do not leave the device unattended when it is running.
•
Do not use the blender jug to store food or drinks.
•
Do not use the device to mix paint or other flammable liquids or in a place
where flammable gases or vapours are present.
•
Avoid spilling food or liquids on the power connector in the recess of the
blender jar. In the event of a spillage, immediately turn off and unplug the
device, allow the spillage to cool, and then clean up.
•
Before use, make sure the blade sealing ring is correctly fitted and the blade
assembly is securely mounted in the base.
•
If the device is not assembled correctly, food can leak and damage the device.
•
Be careful after using the heating function as the surfaces of the components
will be hot for some time after use.
•
Make sure the pot, pot lid and steamer basket are assembled correctly when
using the steamer accessory.
•
Do not touch any part of the steamer except the handles during use.
•
Do not use the steamer without the lid on.
•
When opening the steamer lid, be careful not to scald yourself on the
escaping hot steam.
•
With all other heating functions, make sure that you do not injure yourself
with escaping hot steam.
•
Make sure the vent hole in the steamer lid is not blocked during use.
•
Be careful not to knock the steamer basket off the top of the bowl either
during or after use.
•
Do not reach for a device that has fallen into water. Immediately unplug the
power cord.
•
Do not let the power cord hang over the edge of a table or counter or touch
any hot surface.
•
Do not use the device if it has been dropped or if any part of the device
(including the cord or plug) has been damaged.
•
If the power cord is damaged, it must be replaced by the manufacturer, its
service agent or a similarly qualified person to avoid a hazard.
•
The use of accessories not intended for use with this device may result in
injury to the user or damage to the device.