Publicidad
Idiomas disponibles
Idiomas disponibles
EN
70
Function knob
The function knob can be turned or pressed.
•
Press the function knob to start or pause the device during operation.
•
Turn the function knob clockwise to set the timer, speed, temperature and
heating power.
Note: The blender jug and lid must be on and locked for the device to work,
with the exception of the scale function and the heating function.
If the device is paused, it will automatically switch to standby mode after about 10
minutes and the display will turn off.
Set automatic switch-off timer
The time is displayed in hours : minutes : seconds.
•
To set the desired operating time, touch the timer button
minutes setting. The minute digits flash. Turn the function knob to set the
desired minutes.
•
Touch the timer button again to enter the seconds setting. The second digits
flash. Rotate the function knob to set the desired seconds.
•
Touch the timer button again to enter hour setting. The hour digits flash. Turn
the function knob to set the desired number of hours between 1 and 12 hours.
Note: After setting the timer, wait 5 seconds until the timer stops flashing and
the set time has been accepted. Then start the appliance by pressing the Start/
Pause button.
to enter the
Publicidad
