Jata JBCP3305 Instrucciones De Uso página 14

USE IN SELF MODE, WIRELESS. CHARGING THE BATTERY
• Before using for the first time it is necessary to charge the battery.
• Connect the USB cord (11) in the lower part of the unit and the adapter to the mains, the
charge indicator (d) in the control panel (9) will light on in red.
• The first charge of the battery will take 12 hours. For later charges it will be enough to
keep it charging during 1,5 hours.
• To use the appliance remove the adaptor. The battery works around 80 minutes. When
the trimmer needs cleaning, the cleaning indicator (b) (
• In order to optimise the durability of the battery bear in mind the following pieces of
advice:
- Never exceed the indicated loading times for the battery.
- It is important to discharge the battery before it is recharged, leave it on until it
stops or the power decreases clearly.
- The battery must be recharged every 6 months if it has not been used for said
period of time.
- Also recharge if it has not been used for more than a month.
TO PLACE THE ACESSORIES
• The following accessories: the trimmer, shaver and cutting hair accessory are placed
inserting the lower flange with a slightly pressure towards the appliance.
• To remove them, exert slight reverse pressure. (Fig 1-2-3-4)
LUBRICATION
• For the body shaver (1) and cutting guide accessory (5) work correctly it is absolutely
necessary to lubricate the blades with oil before each use.
• Carefully pour a few drops of oil, which is provided, between the teeth of the blade, or if
you have run out, with another high quality, acid free oil.
• Turn the hair clipper on for a few seconds and clean the excess oil off with a cloth.
BODY TRIMMER
• Use the body shaver (1) without the cutting guide.
• Before depilation, the skin must be dry and clean, free of oil or cream.
• Pass your hand over the depilation area in the contrary way to the growing hair to lift up
the shorter hair.
• Cut the hair in the opposite direction of its growth.
SHAVER
• Insert shaver (4) on the main unit. (fig 9-10)
• Do not press it too much in the skin.
NOSE-EAR ACCESSORY
• Place the accessory (2) in the main unit. Insert the groomer into the nostril or ear canal
and rotate in a circular motion.
• Do not insert the unit more than 0,5 cm.
CUT THE HAIR
• To cut the hair it is compulsory to use the accessory (5) together the cutting guides (7) that
allows a cutting length between 3 and 12 mm. (fig 5-6-7-8)
• To get an exact hair cut, and the side burns, nape and the area around the ears with
straight lines, turn the hair clippers round and place them at a straight angle with your
head so the blade is in slight contact with the skin, and shave downwards. This way you
will get a perfect finish, as if shaving.
BEARD
• To cut the beard use the body shaver and the cutting guide accessory with each guide
or the trimmer (3). If you are using the body shaver with the trimmer you can select the
cutting height between 2 to 6 mm.
) will light up.
14