Descargar Imprimir esta página

IPC CT160 700 Manual De Instrucciones página 62

Publicidad

2.2.
Identifying the machine
The rating plate provides the following information:
• model;
• power supply;
• total nominal power;
• serial number;
• year of fabrication;
• dry weight;
• maximum slope;
• barcode with serial number;
• manufacturer's identification.
2.3.
Documentation provided with the machine
• User manual;
• guarantee certificate;
• EC certificate of conformity.
3.1.
General description
This machine is a scrubber drier for sweeping, washing and drying flat, horizontal, smooth
or moderately rough, even and obstacle free floors in civil and industrial premises.
The scrubber drier spreads a solution of water and detergent in the correct concentration
on the floor and then scrubs it to remove the dirt. By carefully choosing the detergent and
brushes (or abrasive disks) from the wide range of accessories available, the machine
can be adapted to a wide range of combinations of types of floor and dirt.
A suction system incorporated in the machine dries the floor after washing by means of
the low pressure generated in the dirty water tank by the suction motor. The squeegee
connected to the tank collects the dirty water.
3.2.
Legend
The main parts of the machine are as follows:
• detergent tank (fig. A, ref. 1): contains and transports the mixture of clean water and
detergent;
• dirty water tank (fig. A, ref. 2): collects the dirty water picked up from the floor after
washing;
• control panel (fig. A, ref. 3);
• head assembly (fig. A, ref. 4): the main element is the brushes which distribute the
detergent solution on the floor and remove the dirt;
• squeegee assembly (fig. A, ref. 5): wipes and dries the floor by collecting the water;
3.3.
Danger zones
A - Tank assembly: when using certain detergents, danger of irritation for eyes, skin,
mucous membranes and respiratory tract and of asphyxia.
the dirt collected from the environment (germs and chemical substances). Danger of
crushing between the tank assembly and chassis.
The tank assembly (CT 230) MUST ALWAYS BE raised and lowered using the
handles incorporated in the tank (fig. C, ref. 3).
3.
TECHNICAL INFORMATION
! DANGER
Danger represented by
ENGLISH
5

Publicidad

loading

Este manual también es adecuado para:

Ct230 serieCt160 serieCt160 850Ct160 950Ct160 750 rCt160 750 r sweeper ... Mostrar todo