Medion LIFE X14339 Guia Rápido página 86

 If necessary, you can now configure satellite settings for the relevant satellite:
SATELLITE STATUS
SATELLITE SELECTION
SCAN MODE
SCAN TYPE
SHOP TYPE
TRANSPONDER
LNB CONFIGURATIONS
SIGNAL QUALITY
SIGNAL LEVEL
 Select
and press
SCAN
 If you do not want to set up any TV channels, select
 Once the search has ended, go to receiver mode and select
sing .
OK
 Then accept or skip the information on manufacturer use and diagnosis for transferring your
user data to the device manufacturer. This enables the manufacturer to ensure optimal functio-
nality of the device.
Setup is now complete and the device switches to Internet mode automatically. Press the
button to switch back to TV mode. Opening the Live TV app will also take you to TV mode.
The TV can be reconfigured at any time. To do so, use the
the
SETTINGS > DEVICE PREFERENCES > ABOUT
Satellite setup
Activate/deactivate the satellite status. When deactivated, LNB set-
tings can be changed or a search started.
The selected satellite is displayed here.
Select whether you wish to search for only encrypted, only freely
available channels or for all channels here.
Select whether you wish to search for only digital channels, only ra-
dio stations or for all channels here.
Select the storage type here.
Select the transponder on which the search will be started.
You can configure the LNB settings here.
The signal quality is shown in per cent. Settings here cannot be
changed.
The signal strength is shown in per cent. Settings here cannot be
changed.
or .
OK
and press the
SKIP SCAN
then confirm
NEXT
FACTORY RESET
menu.
or  button.
OK
by pres-
FINISH
or
EXIT
option in
13
EN