Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
CHART
5.
Drain the fuel tank. Clean the fuel line. Replace the fuel filter.
PROBLEM:
The engine
will not start.
1.
Follow the steps, "How To Start The Engine" in this book.
2.
Electric-Start Models: Clean the battery terminals. Tighten the
cables.
3.
Drain the fuel tank. Clean the fuel line. Replace the fuel filter.
4.
Remove the spark plug(s). Move the throttle to the SLOW posi-
tion. Turn the ignition key to the ON position. Try to start the en-
gine several times, tnstall the spark plug.
5.
Replace the spark plug.
6.
Adjust the carburetor.
PROBLEM:
The engine
will not turn over.
1.
Follow the steps, "How To Start The Engine" in this book.
2.
Electric-Start Models: Check the level of the acid in the battery.
tf needed, add water. Charge the battery.
3.
Replace the fuse.
4.
Check the wiring harness for damage or a loose connection.
Repair the damaged wire.
5.
Electric-Start Models: replace the solenoid. Recoil-Start Mod-
els: replace the module.
PROBLEM:
The engine
is difficult
to start.
1.
Adjust the carburetor.
2.
Replace the spark plug.
3.
Replace the fuel filter.
PROBLEM: The engine does not run smooth or has a
loss of power.
1.
Check the oil
2.
Clean the air filter.
3.
Clean the air screen.
4.
Replace the spark plug.
5.
The engine is working too hard. Use a lower gear.
6.
Adjust the carburetor.
7.
Replace the fuel filter.
PROBLEM:
The engine does not run smooth at fast
speed.
1.
Replace the spark plug.
2.
Adjust the throttle control.
3.
Clean the air filter.
4.
Replace the fuel filter.
PROBLEM:
The engine stops when the blades
are
engaged.
1.
Check the wiring harness for damage or a loose connection.
Repair the damaged wire.
PROBLEM: On slopes, the engine stops.
1.
Mow up and down slopes. Never mow across a slope.
PROBLEM:
The engine
will not idle.
1.
Replace the spark plug.
2.
Clean the air filter.
3.
Adjust the carburetor.
4.
Adjustthethrottle
control.
PROBLEM:
A hot engine
causes
a decrease
in power.
1.
Clean the air screen.
2.
Checkthe
oil
3.
Adjust the carburetor.
4.
Replace the fuel filter.
PROBLEM:
Excessive
vibration.
1.
Replacethe
blade.
2.
Check for loose engine bolts.
3.
Decrease the air pressure in the tires.
4.
Adjust the carburetor.
5.
Check for a damaged belt or damaged
pulley. Replace the
damaged parts.
PROBLEM: The grass does not discharge correctly.
1.
Stop the engine. Clean the mower housing.
2.
Raise the height of cut.
3.
Replace or sharpen the blade(s).
4.
Move the shift lever to a slower speed.
5.
Move the throttle control to the FAST position.
6.
Replace the spring for the blade idler.
PROBLEM:
The mower
housing
does not cut level.
1.
Check the air pressure in the tires.
2.
Adjust the level of the mower housing.
3.
Check the front axle. If the front axle does not freely pivot, loos-
en the axle bolt(s).
PROBLEM:
The mower
blades
will not rotate.
1.
Check the mower drive belt. Make sure the belt is installed cor-
rectly.
2.
Replacethe
mower drive belt.
PROBLEM:
The
unit will not move
when
the clutch
is
engaged.
1.
Check the motion drive belt. Make sure the belt is installed
correctly.
2.
Adjust the clutch.
3.
Replacethe
motion drive belt.
PROBLEM: The unit moves slower or stops when the
clutch is engaged.
1.
Adjust the clutch.
2.
Replacethe motion drive belt.
PROBLEM:
When the clutch/brake
pedal is released,
belt
noise can be heard.
1.
Temporary belt noise does not change the operation of the unit.
If belt noise is continuous, check the routing of the belt. Make
sure the belt is inside all belt guides.
2.
If the noise is continuous, adjust the clutch.
PROBLEM: The rear wheels spin over uneven terrain.
1.
Check thefront axle. Ifthefront axle does not freely pivot, loos-
en the axle bolt(s).
_030614L
34
Publicidad
