Gewiss Chorus GW 10 755 Manual Del Usuario página 30

PROGRAMMING WITH THE EASY CONFIGURATOR
Configuration parameters (Easy) - push-button panel section
Once the required function has been created, the operating parameters of the push-
button panel can be set.
The available parameters, in relation to the function created, are listed in the tables given
below.
The value underlined is the default value.
Function: edges
Parameter: edge function
on/ off
off/on
on
off
Function: scene
Parameter: scene number
scene activation 1 (prolonged closing: scene stored)
1
scene activation 2 (prolonged closing: scene stored)
2
scene activation 3 (prolonged closing: scene stored)
3
scene activation 4 (prolonged closing: scene stored)
4
scene activation 5 (prolonged closing: scene stored)
5
scene activation 6 (prolonged closing: scene stored)
6
scene activation 7 (prolonged closing: scene stored)
7
scene activation 8 (prolonged closing: scene stored)
8
Function: dimming
Parameter: push-button function
dimmer
darker
Function: blind control
Parameter: push-button function
up
down
on when pressed, off when released
off when pressed, on when released
on
off
increase light intensity, switch on
reduced light intensity, switch off
lifting the Venetian blinds, adjusting the slats
lowering the Venetian blinds, adjusting the slats
30