Kinderkraft ENOCK Manual De Usario página 23

9 Bolt (M5x45) x4
10 Bolt (M6x30) x2
*- items available only in set that include chair and cushions
C.‫ي‬Position‫ي‬selection‫ي‬for‫ي‬the‫ي‬baby‫ي‬highchair‫ي‬and‫ي‬the‫ي‬chair‫ي‬for‫ي‬older‫ي‬children:
Baby‫ي‬highchair:
In this position, the small board is used as a seat and can be fixed in only two positions available: 520 mm from the floor
in position 9 (fig. P) and 555 mm from the floor in position 10 (fig. R). The large board serves as a leg rest and can be
fixed in positions 3-4-5,‫ي‬depending‫ي‬on‫ي‬a‫ي‬baby's‫ي‬foot‫ي‬position‫(ي‬see‫ي‬fig.‫ي‬below).‫ي‬Use‫ي‬the‫ي‬tray‫ي‬and‫ي‬the‫ي‬bumper‫ي‬bar‫ي‬with‫ي‬a‫ي‬
safety harness. Position 10 is the highest one, and 1 is the lowest (fig. S).
Chair for older children:
In this function, the big board is used as a seat and can be fixed in positions 6-7-8-9-10. The small board serves as a
footrest and can be fixed in positions 1-2-3-4 - adjustable‫ي‬depending‫ي‬on‫ي‬a‫ي‬baby's‫ي‬foot‫ي‬position‫ي‬or‫ي‬dismounted.‫ي‬In‫ي‬this‫ي‬
function, use the tray and the bumper bar with a safety harness.
If‫ي‬child's‫ي‬feet‫ي‬do‫ي‬not‫ي‬reach‫ي‬the‫ي‬floor‫ي‬yet,‫ي‬fix‫ي‬the small board (6) at the position 1/2/3/4 to serve as a leg rest and the large
board (7) at the position 10/9/8/7/6 to serve as a seat (see fig. below).
If your child can sit at a table properly and their feet reach the floor, fix the large board (7) at the position 10/9/8/7/6
to serve as a seat. Do not use the small board (6) (see fig. below).
19* Seat cushion
20* Backrest cushion
23