EN
ENGLISH
INTRODUCTION
The BSW 28 Clarke's sweeper has been designed and built to clean (by sweeping and vacuuming) smooth and solid floors, in
civil and industrial environments and to collect dust and light debris under safe operation conditions by a qualified operator.
BSW 28 is equipped with:
–
one side broom, which removes dust and debris on the machine front right end side (along footpaths, walls, etc.) and it
conveys them toward the main broom.
–
one main broom, which removes and collects dust and debris that are then vacuumed into the hopper; the cleaning width
is 28 in (720 mm).
HOW TO KEEP THIS MANUAL
The Operator's Manual must be kept near the machine, inside an adequate case, away from liquids and other substances that
can cause damage to it.
IDENTIFICATION DATA
The machine model and serial number are marked on the label and can be read from the outside (AC, Fig. 2).
The machine model year is written in the Declaration of Conformity and it is also indicated by the first two figures of the machine
serial number.
This information is useful when requiring machine spare parts. Use the following table to write down the machine identification
data for any further reference.
MACHINE Model_____________________
MACHINE Serial Number ______________
CHANGES AND IMPROVEMENTS
Clarke constantly improves its products and reserves the right to make changes and improvements at its discretion without
being obliged to apply such benefits to the machines that were previously sold.
Any change and/or addition of accessories must be approved and performed by Clarke.
UNPACKING/DELIVERY
Upon delivery carefully check that the machine and its packing have not been damaged during transportation. In case of visible
damages, keep the packing and have it checked by the carrier that delivered it. Call the carrier immediately to fill in a damage
claim.
Please check that the following items have been supplied with the machine:
1.
Technical documents:
- Sweeper Operator's Manual
- Sweeper Spare Parts List
2.
No. 1 vacuum system motor fuse (7.5 A)
6
Operator's Manual - BSW 28