Craftsman 126.32561 Manual Del Operador página 31

,A WARNING [
The use of optical instruments with this
laser could increase the eye risk hazard.
Do not attempt to repair or disassemble
the laser. Entrust any repairs required to
a Sears Service Center.
Use the Laser only as specified in this
Instruction Manual. Use of the laser in
any way not specified in this instruction
manual could result in hazardous
radiation exposure.
SATELLITE WORKPIECE STAND
Incorporated into the Left Hand side of the
machine base is a removable Satellite Stand.
Use this stand to help support long pieces
of material. To remove the Satellite Stand,
press the release button on the top, and slide
the Stand from the machine base. Position
where convenient to adequately support long
workpieces.
(Fig. X)
\
To replace, simply slide the Satellite Stand
back into the machine base until it snaps
securely into place.
ADJUSTABLE STOP PLATE
A Stop Plate designed for use during
repetitive cutting is incorporated into the
Extension Arm on the Right Hand side of
the machine base. The Stop Plate can
be engaged in two positions, inboard and
outboard.
To engage the stop inboard:
Slide the spring-loaded release lock
forwards.
Pull the stop from its stored position
upwards and to the left to the inboard
position.
Slide the release lock backwards to lock
the stop into position. (Fig. Y)
To stow away, reverse the above steps.
(Fig. Y)
(Fig. X)
31