Prusa Research MMU3 Manual Del Usuario página 98

PASO 19 Adapter-printer assembly
Insert the Adapter-printer into the opening on top of the extruder-body. See the
protrusion, it must fit into the groove.
Push it down until it's flush with the surface.
PASO 20 New chimney: parts preparation
98
9B. Mod extrusor MK3S+ (KIT)
Ensamblaje Original Prusa MMU3
Para los siguientes pasos, por
favor prepara:
Chimney base (1x) with the Tappex
Microbarb 0006-M5 threaded
insert
Chimney (1x)
M3nS nut (1x)
M3 washer (1x)
M3x30 screw (1x)
M3x18 screw (1x)