Craftsman 171.926501 Manual Del Propietário página 23

ADJUSTABLE JOINTING FENCE
(Fig. 13)
I - WARNING I
Always make sure
that the router is turned OFF and the
power cord UNPLUGGED before
making any adjustments.
The fence for your router table comes fully
assembled with the adjustable jointing
fence already in place.
To adjust the jolnting fence:
1. Loosen both the adjustable jointing
fence clamping knob and the fence
clamping knob on that side.
2. Slide the jointing fence forward or
backward in the guides to the desired
position.
3. 13ghten both clamping knobs.
To remove and reinstall the
jointing fence:
1. Loosen the fence clamping knobs
completely and remove the knobs and
washers from the carriage bolts. Hold
the carriage bolts for the fence from
underneath the table to keep them
from dropping.
2. Loosen the clamping knob on the
adjustable jointing fence completely,
and remove it and the washer from the
carriage bolt. Remove the carriage bolt
from the bottom of the fence and lift the
jointing fence out of the grooves on
the fence.
Figure 13
Fence Jointing fence
clamping clamping knob
knob
Detail 13
Offset for jointing Workpiece
O O O
3. To reinstall the jointlng fence, align the
guides on the jointing fence with the
grooves on the fence and attach with
the carriage bolt, washer and clamping
knob removed earlier.
4. Reinstall the fence as described on
page 14.
23