Publicidad
Idiomas disponibles
Idiomas disponibles
3.
Tighten all of the hardware securing the hitch support at this time.
4.
Install the bag support assembly onto the mounting assembly on
the tractor by hooking it over the cross mounting bracket outside
of the two tabs. See Fig. 10.
5.
Secure the bag support assembly to the mounting assembly
using a hex bolt (710-3008) and flange lock nut (712-04063)
provided in hardware pack 689-00087. See Fig. 11.
ASSEMBLY AnD InSTALLATIOn
Align hole on bracket
with hole on tractor
Figure 9
Tabs
Top View
Figure 10
Note: On tractors with 42" decks the support assembly mounts
in the center hole as seen above in Fig. 11. On tractors with 46"
decks, the support assembly mounts in the right hand hole as
seen in Fig. 12.
10
42" Decks
Figure 11
46" Decks
Figure 12
Publicidad
