Publicidad
Idiomas disponibles
Idiomas disponibles
3.
General Guidelines
Refer to the Velleman Group NV® Service and Quality Warranty
on the last pages of this manual.
•
Familiarise yourself with the functions of the device before
actually using it.
•
All modifications of the device are forbidden.
•
Only use the device for its intended purpose. Using the device
in an unauthorised way will void the warranty.
4.
Features and specifications
• This product is a unique design for Class III insulation appliance
based on human touch application while touch switch installed
inside/beneath wood board or other insulation materials.
• Function description: Install the touch dimmer inside or beneath
the wood board (or other insulation material like marble ), switch
on/off the light by short touch within 0.5 seconds on the surface
of wood board.
See image on page 2.
• suitable for: 12 and 24V LED strips
5.
Installation
Determine the mounting location:
Determine where to place the touch switch. Choose a location for the
touch switch where the probability of unintended movement is
minimal.
Glue the sensor with the power logo under the insulation material
with a maximum thickness of 32 mm (depending on the type of
material).
Important!
First attach the switch with temporary tape to the back of the
material and test the operation. Try to reduce the thickness of the
plate by a milling into the material to improve operation.
Mount the LED Strip:
Mount the LED Strip in an aluminum profile.
V. 01 – 15/11/2023
LQS05
5
©Velleman Group nv
Publicidad
