EtiamPro LQS05 Manual Del Usuario página 6

Connect the wiring from the switch module of the PIR motion sensor
to the LED Strip and connect the input of the switch module to an
LED power supply. Connection diagram see page 2.
6. Technical Specifications
Physical properties
Cable length
Maximum current rating
Input voltage rating VDC range
Detection range
IP rating
Operating temperature range
Use this device with original accessories only. Velleman Group
nv cannot be held responsible in the event of damage or
injury resulting from (incorrect) use of this device. For more
info concerning this product and the latest version of this
manual, please visit our website www.velleman.eu. The
information in this manual is subject to change without prior
notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman Group nv.
All worldwide rights reserved. No part of this manual may be
copied, reproduced, translated or reduced to any electronic medium
or otherwise without the prior written consent of the copyright
holder.
V. 01 – 15/11/2023
LQS05
100 cm
3 A
12-24 V
32 mm
IP20
-20-45 °C
6 ©Velleman Group nv