Publicidad
Idiomas disponibles
Idiomas disponibles
! Attention: the inclination of the refrigerator must be less than 45° so that the compressor oil does not
enter the cooling circuit. If you do shut down the unit completely, wait 8 hours before turning it back on.
7.
Move the hinge shaft (A) from hole ① to ②. Move the levelling foot (B) from hole ③ to ④. Install the
bottom hinge on the left side of the appliance.
8.
Remove the rubber seal from the door, turn it over, and refit it. Refit the door.
9.
Screw the top hinge back on. Ensure the door is aligned horizontally and that the door seal closes
completely.
10. Replace the hinge cover plates.
11.
Move the handle from the left side to the right side.
56
DO91201
A
B
Publicidad
