RS Pro RS-5505 Manual De Instrucciones página 14

9. FUSE REPLACEMENT
WARNING:
To avoid electric shock, disconnect the test leads from any source
of voltage before removing the fuse/battery door.
To avoid electric shock, do not operate the meter until the fuse/
battery door is in place and fastened securely.
Always use fuses of the proper size and rating:
1. Disconnect the test leads from the meter and any item under test.
2. Open the fuse/battery door by loosening the screw on the door using
a Phillips head screwdriver.
3. Remove the old fuse from its holder by gently pulling it out.
4. Install the new fuse into the holder.
5. Always use a fuse of the proper size and rating:
F500mA 1000V Ceramic Fuse(SIBA UL500mA 1000V,Size:6.3x32mm)
6. Put the fuse/battery door back in place. Insert and securely tighten
the screws.
10. MAINTENANCE & CLEANING
1. Repairs or servicing not covered in this manual should only be
performed by qualified personnel.
2. Periodically wipe the case with a dry cloth. Do not use abrasives or
solvents on this instrument.
12