Publicidad
ASSEMBLY INSTRUCTIONS
F
A
x6
B
G
x6
C
E
x6
D
x2
1) Glue three 10x40mm Wood Dowels (C) and one 14x50mm Dowel (G) into the holes in the
Left Leg Assembly (1) and one 8x30mm Wood Dowel (D) into each end of Seat Brace (6).
Glue the Seat Brace (6) into both Front/Back Aprons (4) with the curved edge facing up
and fasten in place with Screws (E).
Attach the Back (3) and Front/Back Aprons (4) to the Left Leg Assembly (1) with the Dowels,
Barrel Bolts (A) and Barrel Nuts (B) as shown.
Attach the Right Leg Assembly (2) to the Back and Aprons in the same way.
E
x9
FIG. 2
2) Slip the Seat (5) down between the legs onto the seat brace. Attach to the leg assemblies
with Screws (E) through the two predrilled holes in each end of seat into the frame as
shown in FIGURE 2.
Insert a Screw (E) through each of the holes in the bottom of the center Seat Brace
(6) into the slats.
988W2 Esquire Bench
x1
x2
x2
988W2 – Page 3
Publicidad
