Publicidad
We recommend placing a finish on this unit prior to final assembly.
Kb
x 4
Fig. 1
Place a thin film of glue in the dowel holes in Left Front Leg (Bb) and Back Leg (Db). Insert the Side
1.
Stretcher (Eb) and gently tap with a mallet. NOTE: be sure the pocket screw holes in side
stretcher face the bottom. With a damp rag, quickly wipe up any excess glue. Insert #8x1-1/4"
Pan Head Screws (Kb) through the side stretchers and into the legs. See Figure 1. Repeat and
attach the Right Front Leg (Cb) and Back Leg (Db) to the second Side Stretcher (Eb).
Kb
x 2
Fig. 2
Place a thin film of glue in the dowel holes in both leg assemblies. Insert the Back Stretcher (Fb)
2.
and gently tap with a mallet. NOTE: be sure the pocket screw holes in back stretcher face the
bottom. With a damp rag, quickly wipe up any excess glue. Insert #8x1-1/4" Pan Head Screws
(Kb) through the back stretcher and the into legs. See Figure 2.
648Wc Spencer Desk
Assembly Instructions
Tools Required:
Wood Glue, Mallet or Padded Hammer, 9/16" Wrench
IMPORTANT NOTE:
Before doing so, please read the enclosed Finishing Hints.
Db
Kb
Kb
Fb
Phillips Head Screwdriver,
Bb
Eb
Kb
Kb
648Wc — Page 3 — 12/13
Publicidad
