Tripp-Lite SmartRack AG-00E9 Manual Del Propietário página 8

7. Equipment Installation
7.3 Horizontal Rack-Mount Installation
Once you have determined the equipment depth and installation method, use the included silver
mounting screws and cup washers to secure your equipment to the rack rail. Place the cup washers
between the screws and the equipment mounting brackets.
Note: Your equipment may also include mounting hardware. Read the mounting instructions that came with your
equipment before installing your equipment.
7.4 Vertical Rack-Mount Installation
A set of vertical rack mount brackets are located on the left and right sides of the cabinet. Each
bracket set can accommodate 2U of equipment. To install equipment into the vertical rack-mount
brackets, follow the installing cage nuts instructions in section 7.1. Then use the included black
mounting screws and cup washers to secure your equipment to the mounting brackets.
Note: Your equipment may also include mounting hardware. Read the mounting instructions that came with your
equipment before installing your equipment.
7.5 Cable Routing
Two front vertical cable managers and two cable pass-through ports conveniently located on the top
and bottom of the cabinets allow for easy, organized cable routing. Cable tie cut outs can be used
to secure cable bundles to the cabinet.
continued
8
2 2
3
2
1
1 8