Publicidad
Idiomas disponibles
Idiomas disponibles
Guide Plate
!
End Cover
Figure 2 - Insert Guide Plate into Nose
Depress latch and slide magazine cover open (see Figure 3).
Guide Plate
Storage
°
Slide magazine cover forward over magazine until latch
snaps into place, locking magazine cover (see Figure 5).
Figure 5 - Close Magazine
STAPLING
OPERATION
Refer to Figures 6, 7 and 8, pages 4 and 5.
WARNING:
Read and follow all safety rules and operating
instructions in this manual and on warning label of tool before
using this tool. Keep this manual with the tool.
WARNING:
Do not use this tool without safety warning
label. If label is missing, damaged or unreadable, contact
Sears to obtain a new label.
WARNING:
Never operate tool unless nose is in contact
with workpiece. Do not operate tool without fasteners or dam-
age to tool may result. Never fire fasteners into the air
because fasteners may injure operator or others and damage
to tool may result.
°
Position stapler with guide plate and end cover straddling
the cable.
Figure 3 - Open Magazine
Insert fasteners into magazine oriented as shown in Figure 4.
Figure 6 - Position Stapler over Cable
Figure 4 - Load Magazine
4
Publicidad
