Whittier Wood Furniture Bistro 174Wb Instrucciones Para Armar página 3

174Wb Bistro Counterstool & 175Wb Bistro Barstool
177Wb Hawthorne Counterstool & 178Wb Hawthorne Barstool
Phillips Head Screwdriver, Wood Glue, Rubber Mallet or Padded Hammer.
Angled end of
side stretcher.
1) Glue the Side Aprons (Ha) to the Back Leg Assembly (V). The square end of the aprons must be toward
the front and the angled end must match the angle on the Back Leg Assembly.
Glue the Upper Side Stretchers (N) and the Lower Side Stretchers (U) into the Back Leg Assembly.
See FIGURE 1.
FIG. 2
2) Spread glue in the holes in the Front Leg Assembly (W) and attach to the side aprons and side
stretchers. Tap firmly in place. See FIGURE 2.
DO NOT LAY THE CHAIR ON ITS BACK WHEN TAPPING THE FRONT LEG ASSEMBLY IN
PLACE AS YOU MAY DAMAGE THE BACK. Quickly remove any glue that may drip out of the
holes.
ASSEMBLY INSTRUCTIONS
TOOLS REQUIRED:
N
U
W
N
U
Ha
Ha
174Wb & 175Wb & 177Wb & 178Wb (Rev. 01/08) — PAGE 3
IMPORTANT:
READ GLUING HINTS
BEFORE ASSEMBLING!
V
FIG. 1