Piusi SQUALO35 Instalación Uso Y Mantenimiento página 27

(translated from italian)
9 OPERATING CONDITIONS
9.1 ENVIRONMENTAL CONDITIONS
TEMPERA-
TURE
RELATIVE
HUMIDITY
ATTENTION
ATTENTION
9.2 ELECTRICAL POWER SUPPLY
NOTE
ATTENTION
9.3 DUTY CYCLE
NOTE
This manual is the property of PIUSI S.p.A. Any reproduction, even partial, is forbidden.
min. +12 °F / max +104 °F
min. -11 °C / max +40 °C
max. 100%
The temperature limits shown apply to the pump components and must be
respected to avoid possible damage or malfunction.
The pump does not work with frozen fluid.
Consult the fluid data sheet for the range of use.
The pump must be powered by a single-phase line in alternating current whose
nominal values are indicated in the table in the paragraph "TECHNICAL DATA".
The maximum acceptable variations for the electrical parameters are:
Voltage: +/- 5% of the nominal value
Power supply from lines with values that do not fall within the indicate limits could
cause damage to the electrical components and reduction of working perfor-
mance.
The pumps have been designed for continuous.
SUBMERSIBLE PUMP
27
27 /112
/124