Descargar Imprimir esta página

WerkaPro 10387 Manual De Instrucciones Y Uso página 18

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 21
If battery fluid gets into your eyes, flush them with clean water for at least a
few minutes and seek medical attention immediately. (Medical notes: the liquid
is a 25-35% solution of potassium hydroxide).
-
Do not connect the positive and negative poles of the battery with metal objects.
The battery could be short-circuited, which would damage the battery and
could cause severe burns or fire.
-
Charge the battery only with the chargers provided for the product.
-
NOTE: The battery in your tool is a Lithium Ion battery with no self-discharge
or memory effect.
Charger
-
The charger plug must match the socket. Never modify the plug in any way.
Unmodified plugs and matching sockets reduce the risk of electric shock.
-
Use your charger only to charge the type of batteries supplied with your tool.
Other batteries may burst, causing injury and damage.
-
When charging is complete, unplug the charger from the mains and remove the
cord from the machine.
-
Never carry the charger by its cord or pull it out of the socket. Keep the cord
away from heat, oil and sharp edges.
-
Never attempt to charge non-rechargeable batteries.
-
The charger cord is not modifiable, do not continue to use if the cord is
damaged.
-
Do not expose to water or rain, do not use in wet conditions.
-
Do not open or probe the charger.
-
For indoor use only
Assembly and operation
Inserting / replacing the blade
WARNING: Remove the battery from the pruning shears before inserting/replacing
the blade. Serious injury or death can result from bodily contact with a moving
blade.

Publicidad

loading