Publicidad
Idiomas disponibles
Idiomas disponibles
TABLE OF CONTENTS
Safety Rules .................................................
2
Warranty
....................................................
3
Know Your Unit ...............................................
3
Operating Instructions
.........................................
4
Maintenance and Repair Instructions
..............................
4
Cleaning and Storage
..........................................
4
Troubleshooting
Chart
.........................................
4
Service Numbers
.....................................
Back Cover
All information, illustrations, and specifications in this manual are based
on the latest product information available at the time of printing. We
reserve the right to make changes at any time without notice.
The purpose of safety symbols is to attract your attention to possible dangers.
The safety symbols, and their explanations, deserve your careful attention and
understanding. The safety warnings do not by themselves eliminate any danger.
The instructions or warnings they give are not substitutes for proper accident
prevention measures.
SYMBOL
MEANING
SYMBOL
MEANING
,_
DANGER:
Failure to obey a safety warning will result in serious
injury to yourself or to others. Always follow the safety precautions
to reduce the risk of fire, electric shock and personal injury.
,_
WARNING:
Failure to obey a safety warning can result in injury
to yourself and others. Always follow the safety precautions to
reduce the risk of fire, electric shock and personal injury.
CAUTION:
Failure to obey a safety warning may result in
property damage or personal injury to yourself or to others.
Always follow the safety precautions to reduce the risk of fire,
electric shock and personal injury.
Read
the
Operator's
Manual
and
follow
all
warnings
and
safer
instructions.
Failure to do so can result in serious
injury to the operator
and/or bystanders.
FOR QUESTIONS,
CALL 1-800-235-5878
NOTE:
Advises you of information
or instructions
vital to the operation
or maintenance
of the equipment.
+ IMPORTANT
SAFETY INSTRUCTIONS
+
GENERAL
POWER TOOL SAFETY WARNINGS
WARNING Read aU safety warnings
and instructions.
Failure to follow
the warnings and instructions
may result in electric shock, fire and/or
serious injury.
Save all warnings
and instructions for future reference.
Work area safety:
a) Keep work area clean and well lit. Cluttered or dark areas invite
accidents.
b) Do not operate power tools in explosive
atmospheres,
such as in the
presence of flammable
liquids,
gases or dust. Power tools create
sparks which may ignite the dust or fumes.
c) Keep children
and bystanders
away while operating a power tool.
Distractions
can cause you to lose control.
Electrical
safety:
a) Power tool plugs must match the outlet.
Never modify
the plug in any
way. Do not use any adapter
plugs with earthed
(grounded) power
tools. Unmodified
plugs and matching outlets will reduce risk of electric
shock.
b) Avoid body contact
with earthed
or grounded surfaces
such as
pipes, radiators,
ranges and refrigerators.
There is an increased risk of
electric shock if your body is earthed or grounded.
c) Do not expose
power tools to rain or wet conditions.
Water entering a
power tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying,
pulling or
unplugging
the power tool. Keep cord away from heat, oil, sharp
edges or moving
parts. Damaged or entangled cords increase the risk
of electric shock.
e) When operating a power tool outdoors, use an extension
cord
suitable
for outdoor
use. Use of a cord suitable for outdoor use reduces
the risk of electric shock.
f) If operating
a power tool in a damp location
is unavoidable,
use a
residual
current
device (RCD) protected supply.
Use of an RCD
reduces the risk of electric shock.
Personal
safety:
a) Stay alert, watch what you are doing and use common
sense when
operating a power tool
Do not use a power tool while you are tired or
under the influence of drugs, alcohol or medication.
A moment of
inattention while operating power tools may result in serious personal injury.
b) Use personal protective
equipment.
Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes, hard
hat, or hearing protection
used for appropriate
conditions
will reduce
personal injuries.
c) Prevent unintentional
starting.
Ensure the switch
is in the off-position
before connecting
to power source and/or
battery
pack, picking up
or carrying
the tool. Carrying power tools with your finger on the switch
or energizing power tools that have the switch on invites accidents.
d) Remove any adjusting
key or wrench
before turning
the power tool
on. A wrench or a key left attached to a rotating part of the power tool
may result in personal injury.
e) Do not overreach.
Keep proper
footing
and balance
at all times. This
enables better control of the power tool in unexpected
situations.
f) Dress properly.
Do not wear loose clothing
or jewelry. Keep your hair,
clothing
and gloves away from moving
parts.
Loose clothes, jewelry or
long hair can be caught in moving parts.
g) If devices
are provided
for the connection
of dust extraction
and
collection
facilities,
ensure these are connected
and properly
used.
Use of dust collection can reduce dust-related
hazards.
Power tool use and care:
a) Do not force the power tool. Use the correct
power tool for your
application.
The correct power tool will do the job better and safer at the
rate for which it was designed.
b) Do not use the power tool if the switch
does not turn it on and off.
Any power tool that cannot be controlled
with the switch is dangerous
and must be repaired.
c) Disconnect
the plug from the power source
and/or the battery
pack
from the power tool before making
any adjustments,
changing
accessories,
or storing
power tools. Such preventive safety measures
reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children
and do not allow
persons unfamiliar
with the power toot or these instructions to
operate the power tool
Power tools are dangerous in the hands of
untrained users.
e) Maintain
power tools. Check for misalignment
or binding of moving
parts, breakage
of parts and any other condition
that may affect the
power tool's operation.
If damaged,
have the power tool repaired
before use. Many accidents are caused by poorly maintained power tools.
f) Keep cutting
tools sharp and clean. Properly maintained cutting tools
with sharp cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories
and tool bits etc. in accordance
with
these instructions,
taking into account
the working
conditions
and
the work to be performed.
Use of the power tool for operations different
from those intended could result in a hazardous situation.
Service:
a) Have your power tool serviced
by a qualified
repair person using only
identical replacement
parts. This will ensure that the safety of the
power tool is maintained.
Publicidad
