Oerlikon CITOSTEEL 255C Manual De Instrucciones página 36

Service Menu
It allows the access to special service
functions.
WARNING
Service Menu is available when USB storage device is
connected.
Figure 63.
Table 16.
Symbol Description
Service weld logs
Weld History
SnapShot
Service weld logs – allows recording welding
parameters which were using during the welding.
To access the menu:

Make sure that USB device is connected to welding
machine

Access to the Settings and Configuration Menu.

Use the Right Knob [36] to highlight the Service
Menu icon

Press the Right Knob [36] – the recording process
will started.
Figure 64.
English

Press the Right Knob [36] to continue.

Press the Left Knob [35] or Button [37] to exit

Recording icon will appear on the Status
bar [38].
Note: To stop the recording go to Service
Menu and press the Service weld logs icon again
Weld history
parameters are saved into the USB device folder.To
access the Welding history:

Make sure that USB device is connected.

Access to the Settings and Configuration Menu.

Go to Service Menu → Weld History

Press the Right Knob [36] to get access of Weld
history – the list of used parameters:
- Weld number
- Average WFS
- Average current [A]
- Average voltage [V]
- Arc time [s]
- Welding program number
- Job number/name
32
Figure 65.
– after recording,
Figure 66.
English
welding