Publicidad
EN
Even Feed / Walking Foot
The Even Feed / Walking Foot has its own set of feed dogs
that work in conjunction with the sewing machine's feeding
system to aid the movement of the fabric. This is important
when sewing several layers of fabric, especially when
quilting. This presser foot is also great for matching plaids or
stripes and sewing fabrics with nap or pile, to keep them
from shifting.
1. Loosen the presser bar screw, then remove the presser
bar screw, presser foot holder and foot.
2. Place the Even Feed / Walking Foot onto the presser bar,
making sure the bar fits over the needle bar.
Replace the presser bar screw. Once it is correctly seated
onto the presser bar, secure it in place using a screwdriver.
3. To sew seams in plaid, pile or napped fabrics, place two
pieces of the fabric, right sides together, under the presser
foot.
Select straight stitch, with a medium stitch length setting.
Lower the presser foot, then sew the seam from top to
bottom.
To sew quilt layers, first secure the top fabric, batting and
backing fabric together with pins or basting. Place all
layers of fabric together under the presser foot. Lower the
presser foot, then sew the layers together.
Note:
If desired, lines can be drawn onto the fabric using a
fabric marking pen/pencil and ruler as guides for stitching.
1
3
46
2
Publicidad
