Max Music GigKit Electric Guitar Pack Manual De Instrucciones página 6

CLIP-ON DIGITAL TUNER
1. Power / Mode button
2. Display
a. Note name
b. String number
c. Chromatic / Guitar / Bass
d. Measuring range
3. Clip
4. Battery compartment
Inserting the battery
Press on the battery compartment cover as marked on the back of the
device. Open the compartment and insert a fresh CR2032 battery, paying close attention to the polarity. The life of the battery
depends on the conditions of use.
Note: If the device does not work as described in this manual, and you do not solve the problem by switching it off and on
again, remove the battery and reinstall it to possibly solve the problem.
Operating
1. Attach the device to your instrument via the clip.
2. Press and hold the button for 2 seconds to turn the unit on.
Select the tuning. Press the button repeatedly to select 'Chromatic', 'Guitar' or 'Bass' as the tuning.
3.
▪ If you select 'Chromatic', the display will show the note name.
▪ If you select 'Guitar' or 'Bass', the display will show the string number and the note name.
4. Play a single note on your instrument, the note name or string number is displayed. The backlight changes and the
measuring range is displayed.
▪
If the backlight turns green and the gauge is centered, the note is in tune correctly.
▪
If the backlight turns blue and the indicator is pointing to the left, the tuning is too low.
▪
If the backlight turns blue and the display is pointing to the right, the tuning is too high.
5. If the unit does not detect any signal for 3 minutes after switching it on, it will switch off automatically.
6