Replacing Carbon Brushes; Optional Accessories - Makita 4131 Manual De Instrucciones

Carbide-tipped saw blades for metal cutter
•
cannot be re-sharpened.

Replacing carbon brushes

001145
Remove and check the carbon brushes regularly.
Replace when they wear down to the limit mark. Keep
the carbon brushes clean and free to slip in the holders.
Both carbon brushes should be replaced at the same
time. Use only identical carbon brushes.
Use a screwdriver to remove the brush holder caps.
Take out the worn carbon brushes, insert the new ones
and secure the brush holder caps.
1
005356
Carbide-Tipped Metal Blades for Many Applications
METAL SHEET
Size(mm)
t=1.5 t=3.0
X
185X36T
185X38T
185X48T
185X70T
005705
CAUTION:
Always use carbide-tipped saw blades appropriate
•
for your job. Do not cut aluminum, wood, plastics,
concrete, tiles, etc.
1. Limit mark
1
1. Screwdriver
2. Brush holder
cap
2
ANGLE-STUD
C-STUD
50X100 45X90 50X50
t=1.6 t=3.2 t=4
X
X X X
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.

OPTIONAL ACCESSORIES

CAUTION:
These
•
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Rip fence (Guide rule)
•
Safety goggle
•
Recommended Carbide-tipped saw blades &
•
workpiece ranges
Applications
METAL STUD
REBAR
50X50 t=0.56 t=1.6
t=6 25Ga 16Ga
X
X X X
Excellent
Carbide-tipped saw blades for metal cutting saw
•
are not to be re-sharpened.
NOTE:
Some items in the list may be included in the tool
•
package as standard accessories. They may differ
from country to country.
8
accessories or
persons. Only use
PIPE
25
50X100 60
20 t=3.2 t=1.2 t=3.8
X X X
Good
Fair
attachments are
accessory or
CORRUGATED
SHEET
t=1.0-2.0
t=0-0.9
X X
X X
X
X
Not Applicable