Publicidad
Idiomas disponibles
Idiomas disponibles
Step 2 Attach the Wall Plate [01] to the Wall
For wood stud installation, follow STEP 2A.
For concrete installation, follow STEP 2B.
Step 2A Wood Stud Option
WARNING:
Do not use a drill for tightening the lag screws! Only use a socket wrench.
Avoid potential personal injury or property damage! DO NOT over-tighten the lag
screws [A1]. Tighten the lag screws [A1] only until they are pulled firmly against
the wall plate [01].
DO NOT USE ANCHOR [A2] FOR THIS STEP.
Ensure the wall plate is securely fastened to the wall before
continuing to the next step.
● Nominal wood stud size: common 2 x 4 in (51 x 102 mm)
● Stud center must be verified.
2A-1
OR
(Not lncluded)
Use a stud finder (not included) to
locate wood studs or use an awl
(not included) to verify the edges.
Mark the edge and center locations.
09
X
Stud finder
(Not lncluded)
Wall
Anchor
A2
Awl
Publicidad
